Dr.-Ing.  Matthias Brodatzki

Dr.-Ing. Matthias Brodatzki

  • Engelbert-Arnold-Straße 5
    76131 Karlsruhe
Lehre
Titel Typ Semester Ort
Praktikum Sommersemester

Publikationen


Holistic Efficiency Map Calculation of Variable Flux Machines Regarding Relative Magnetisation
Kesten, J.; Müller, P.; Brodatzki, M.; Doppelbauer, M.
2024. 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 1023–1029, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEEDAM61530.2024.10609194
Investigation of Electrostatic Shieldings in Traction Motors to Mitigate Capacitive Bearing Currents
Scheuermann, S.; Brodatzki, M.; Doppelbauer, M.
2024. 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Napoli, Italy, 19-21 June 2024, 1087–1092, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEEDAM61530.2024.10609042
Influence Analysis on the Bearings’ Impedance Behavior of Inverter-Fed Motor Drives
Scheuermann, S.; Hagemann, B.; Brodatzki, M.; Doppelbauer, M.
2023. Elektromechanische Antriebssysteme 2023 : Tagungsband der 9. Fachtagung (VDE OVE) 8. und 9. November 2023 in Wien. Hrsg.: A. Binder; M. Doppelbauer, 99–105, VDE Verlag
Identification of Rotor Position and Current Dependent Flux Linkage Maps for EESMs
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, 17th - 20th May 2024, 1996–2003, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567840
“True-MTPL” – A New Optimization Method for Minimum Loss Operation of PMSM Drives
Goehner, S.; Brodatzki, M.; Liske, A.; Hiller, M.; Kolb, J.
2023. Elektromechanische Antriebssysteme 2023. Hrsg.: A. Binder, 88–94, VDE Verlag
Local Heat Transfer Coefficient Measurements on Shaft Spray Cooled End Windings
Hoffmann, F.; Bender, J.; Parche, M.; Brodatzki, M.; Dietrich, B.; Wetzel, T.; Doppelbauer, M.
2024. IEEE Transactions on Industry Applications, 60 (4), 5931–5940. doi:10.1109/TIA.2024.3379301
New Current Control Strategy for EESMs Based on the Magnetic Equivalent Circuit with Dynamic Decoupling of the d- and e-Axis
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2023. 2023 IEEE 8th Southern Power Electronics Conference (SPEC), 8 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC56436.2023.10408003
A New Resistive Adaptive Gate-Driving Concept with Automated Identification of Operational Parameters
Swoboda, P.; Kolb, J.; Brodatzki, M.; Humbert, A.; Hiller, M.
2023. PCIM Europe : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 8 S., VDE Verlag. doi:10.30420/566091150
Comparison of Losses in Small Star-and Delta-Connected Permanent Magnet Synchronous Machines
Decker, S.; Rollbuhler, C.; Brodatzki, M.; Rehm, F.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)
Design guideline for PCB integrated, high bandwidth, current slope sensing based on a planar Rogowski coil
Stoß, J.; Wurster, C.; Menger, N.; Brodatzki, M.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)
DQ0-modelling and parametrization approaches for small delta connected permanent magnet synchronous machines
Decker, S.; Rollbühler, C.; Rehm, F.; Brodatzki, M.; Oerder, A.; Liske, A.; Kolb, J.; Braun, M.
2021. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), 608–614, Institution of Engineering and Technology (IET). doi:10.1049/icp.2021.1082
DQ0 Modelling and Parameterization of small Delta connected PM Synchronous Machines
Decker, S.; Foitzik, S.; Rehm, F.; Brodatzki, M.; Rollbuhler, C.; Kolb, J.; Braun, M.
2020. 2020 International Conference on Electrical Machines (ICEM), 144–150, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM49940.2020.9270801
Predictive Trajectory Control with Online MTPA Calculation and Minimization of the Inner Torque Ripple for Permanent-Magnet Synchronous Machines
Decker, S.; Brodatzki, M.; Bachowsky, B.; Schmitz-Rode, B.; Liske, A.; Braun, M.; Hiller, M.
2020. Energies, 13 (20), Article: 5327. doi:10.3390/en13205327
Online Parameter Identification of Permanent Magnet Synchronous Machines with Nonlinear Magnetics based on the Inverter Induced Current Slopes and the dq-System Equations
Decker, S.; Stoss, J.; Liske, A.; Brodatzki, M.; Kolb, J.; Braun, M.
2019. Proceedings 2019 European Conference on Power Electronics and Applications (EPE’19 ECCE Europe), Genova, Italy, 2019, P.1-P.10. doi:10.23919/EPE.2019.8915019
Position and Speed Estimation Algorithm for Permanent Magnet Synchronous Machines Considering Nonlinear Magnetic Effects
Brodatzki, M.; Richter, J.; Kolb, J.; Braun, M.
2019. Green world with power electronics : 10th International Conference on Power Electronics - ECCE Asia, May 27-30, 2019, BEXCO, Busan, Korea, 724–731, Institute of Electrical and Electronics Engineers (IEEE)
Decoupled circulating- and output-current control of parallel inverter systems
Brodatzki, M.; Kammerer, F.; Braun, M.
2016. 42nd Annual Conference of the Industrial Electronics Society, Florence, I, October 24- 27, 2016, 3311–3316, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON.2016.7794010
abgeschlossene studentische Arbeiten
Bild Titel Bearbeiter Typ

Adrian Aschenbrenner

Bachelorarbeit

Alexander Oerder

Masterarbeit

Benjamin Stoll

Masterarbeit

Dennis Wöhrle

Bachelorarbeit

Felix Kappeler

Masterarbeit

Iteb Guenichi

Bachelorarbeit

Manuel Burkart

Masterarbeit

Marcus Becker

Bachelorarbeit

Moritz Hechler

Masterarbeit

Philipp Schmidt

Masterarbeit

Sebastian Schnurr

Masterarbeit