Dr.-Ing. Andreas Liske Andreas Liske

Dr.-Ing. Andreas Liske

Publikationsliste


2024
Improved Test Circuit for Characterization of the Dynamic On-Resistance of GaN-HEMTs over a Wide Operating Range
Swoboda, P.; Frank, S. R.; Liske, A.; Hiller, M.
2024. 2024 Energy Conversion Congress & Expo Europe (ECCE Europe), 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCEEurope62508.2024.10751914
Gradient Based Hysteresis Current Control – A Parameter-Free Current Control Method for Highly Utilized PMSM Drives
Bachowsky, B.; Stoß, J.; Brodbeck, M.; Liske, A.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), 2056 – 2063, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567511
Efficient nonlinear modelling of spatial flux harmonics of squirrel cage induction motors using inverse flux maps and static FEA
Stoss, J.; Mader, P.; Geier, L.; Karayel, A.; Liske, A.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, 17th -20th May 2024, 1182–1189, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567693
Identification of Rotor Position and Current Dependent Flux Linkage Maps for EESMs
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2024. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, 17th - 20th May 2024, 1996–2003, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPEMC-ECCEAsia60879.2024.10567840
Moving Lean Instant Slope Constant Estimator for Fast Online Measurement of Derivative and Absolute Value of Oversampled Signals
Liske, A.; Bachowsky, B.; Brodbeck, M.; Hiller, M.
2024. 2023 IEEE 8th Southern Power Electronics Conference and 17th Brazilian Power Electronics Conference (SPEC/COBEP), Florianopolis, 26th-29th November 2023, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC56436.2023.10408045
2023
Online Identification of Nonlinear Flux Linkages Using Neural Networks for Highly Utilized PMSMs
Oerder, A.; Liske, A.; Hiller, M.
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, 29th October - 2nd November 2023, 4959 – 4965, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE53617.2023.10362736
Unified predictive flux control for EESM, IM, PMSM and SyRM
Stoß, J.; Geier, L.; Karayel, A.; Decker, S.; Liske, A.; Hiller, M.
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, 29th October - 2nd November 2023, 5009–5019, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ecce53617.2023.10362028
New Current Control Strategy for EESMs Based on the Magnetic Equivalent Circuit with Dynamic Decoupling of the d- and e-Axis
Goehner, S.; Stoss, J.; Brodatzki, M.; Bachowsky, B.; Liske, A.; Kolb, J.; Hiller, M.
2023. 2023 IEEE 8th Southern Power Electronics Conference (SPEC), 8 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC56436.2023.10408003
Generalized Inversion of n-dimensional Flux Maps for Unified Nonlinear Machine Models and Predictive Control Algorithms
Geier, L.; Stoß, J.; Liske, A.; Hiller, M.
2023. 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, USA, 29 October 2023 - 02 November 2023, 4821–4828, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE53617.2023.10362422
Identification of rotor and stator flux linkage maps of squirrel cage induction motors based on identification of rotor time constant maps
Stoß, J.; Karayel, A.; Geier, L.; Liske, A.; Hiller, M.
2023. 25th European Conference on Power Electronics and Applications (EPE’23 ECCE Europe), 11 S., Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EPE23ECCEEurope58414.2023.10264589
“True-MTPL” – A New Optimization Method for Minimum Loss Operation of PMSM Drives
Goehner, S.; Brodatzki, M.; Liske, A.; Hiller, M.; Kolb, J.
2023. Elektromechanische Antriebssysteme 2023. Hrsg.: A. Binder, 88–94, VDE Verlag
Multi-Parameter Analysis and Measurement of Resonances in Grid-Connected Converters with LCL Filters
Schulz, D.; Liske, A.; Hiller, M.
2023. 25th European Conference on Power Electronics and Applications (EPE’23 ECCE Europe), Aalborg, Denark, 4th - 8th September 2023, 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EPE23ECCEEurope58414.2023.10264365
2022
Measurement of Inverter Induced Current Slopes for Control and Identification Algorithms in Power Electronics and Electrical Drives Applications
Liske, A.
2022, Dezember 7. 7th Southern Power Electronics Conference (SPEC 2022), Nadi, Fidschi, 5.–8. Dezember 2022
Hybrid torque sensing concept for high frequency and dynamic torque ripple measurements for brushless dc motors
Stoß, J.; Schmitz-Rode, B.; Niklaus, L.; Liske, A.; Hiller, M.
2022. 2022 IEEE Energy Conversion Congress and Exposition (ECCE), Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE50734.2022.9947796
An Easily Adaptive Current Control Method for DC-DC Converters
Liske, A.
2022, September 15. Automotive Symposium - Inverter Trends & Technology (2022), Wangen im Allgäu, Deutschland, 15. September 2022
Power Hardware-in-the-Loop Test Bench for Permanent Magnet Synchronous Machines based on a Parallel Hybrid Converter
Stefanski, L.; Schmitz-Rode, B.; Schwendemann, R.; Weis, N.; Liske, A.; Hiller, M.
2022, Juni 22. 23rd Workshop on Control and Modeling for Power Electronics (COMPEL 2022), Tel Aviv, Israel, 20.–23. Juni 2022
Power Hardware-in-the-Loop Test Bench for Permanent Magnet Synchronous Machines based on a Parallel Hybrid Converter
Stefanski, L.; Schmitz-Rode, B.; Schwendemann, R.; Weis, N.; Liske, A.; Hiller, M.
2022. 2022 IEEE 23rd Workshop on Control and Modeling for Power Electronics (COMPEL): 20–23 June 2022, Tel Aviv, Israel, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COMPEL53829.2022.9829995
A modular signal processing platform for grid and motor control, HIL and PHIL applications
Schmitz-Rode, B.; Stefanski, L.; Schwendemann, R.; Decker, S.; Mersche, S.; Kiehnle, P.; Himmelmann, P.; Liske, A.; Hiller, M.
2022. 2022 International Power Electronics Conference (IPEC-Himeji 2022- ECCE Asia), 1817–1824, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/IPEC-Himeji2022-ECCE53331.2022.9807061
Angle-dependent identification of PMSM HF-parameters with large bandwidth based on switching harmonics of a 2-level inverter
Stoß, J.; Schmitz-Rode, B.; Steimel, P.; Aouadi, H.; Liske, A.; Hiller, M.
2022. IEEE 7th Southern Power Electronics Conference (SPEC), 05-08th December, 2022, Fiji, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SPEC55080.2022.10058360
Neue Methode zur Bestimmung und Beschreibung der taktfrequenten Stromsteigungen in Drehstromsynchronmaschinen. Dissertation
Liske, A.
2022. KIT Scientific Publishing. doi:10.5445/KSP/1000130835
2021
Measuring and Characterization of a Pedal Electric Cycle (Pedelec) Drivetrain on a Test-Bench for Modelling and Optimization
Schmitt, M.; Decker, S.; Leister, L.; Liske, A.; Doppelbauer, M.
2021. 2021 IEEE Vehicle Power and Propulsion Conference (VPPC): Proceedings ; Gijon, Spain, 25–28 October 2021, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/VPPC53923.2021.9699154
A novel high dynamic six phase 120 kW Power Hardware in the Loop Emulation Test Bench for emulating AC/DC Grids and Electrical Machines
Stefanski, L.; Schwendemann, R.; Bernet, D.; Braeckle, D.; Schmitz-Rode, B.; Liske, A.; Hiller, M.
2021, September 6. 23rd European Conference on Power Electronics and Applications (EPE`23 ECCE Europe 2021), Online, 6.–10. September 2021
A novel high dynamic six phase 120 kW Power Hardware in the Loop Emulation Test Bench for emulating AC/DC Grids and Electrical Machines
Stefanski, L.; Schwendemann, R.; Bernet, D.; Braeckle, D.; Schmitz-Rode, B.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe), Ghent, Belgium, 6-10 Sept. 2021, P.1-P.10, Institute of Electrical and Electronics Engineers (IEEE)
Design guideline for PCB integrated, high bandwidth, current slope sensing based on a planar Rogowski coil
Stoß, J.; Wurster, C.; Menger, N.; Brodatzki, M.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)
Design of an Intelligent, Modular IGBT/SiC Inverter Platform up to 400 kW for Fast Realization of New Test-Bench Concepts
Stoß, J.; Frank, S.; Menger, N.; Sommer, F.; Gast, M.; Decker, S.; Liske, A.; Hiller, M.
2021. PCIM Europe digital days 2021 : International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Proceedings, 3 - 7 May 2021, 1670–1677, VDE Verlag
Comparison of Losses in Small Star-and Delta-Connected Permanent Magnet Synchronous Machines
Decker, S.; Rollbuhler, C.; Brodatzki, M.; Rehm, F.; Liske, A.; Hiller, M.
2021. 2021 23rd European Conference on Power Electronics and Applications (EPE’21 ECCE Europe): 6-10 September 2021, online, Institute of Electrical and Electronics Engineers (IEEE)
DQ0-modelling and parametrization approaches for small delta connected permanent magnet synchronous machines
Decker, S.; Rollbühler, C.; Rehm, F.; Brodatzki, M.; Oerder, A.; Liske, A.; Kolb, J.; Braun, M.
2021. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020), 608–614, Institution of Engineering and Technology (IET). doi:10.1049/icp.2021.1082
2020
Cascaded H-Bridge based Parallel Hybrid Converter – A new Voltage Source for Power-Hardware-in-the-Loop Emulation Systems
Stefanski, L.; Schwendemann, R.; Bernet, D.; Widenmeyer, M.; Liske, A.; Hiller, M.
2020. 2020 IEEE 21st Workshop on Control and Modeling for Power Electronics (COMPEL), Aalborg, Denmark, Denmark, 9-12 Nov. 2020, Art.Nr. 9265820, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COMPEL49091.2020.9265820
Short-Circuit Turn OFF Capability of an Adaptive Open Loop Gate Driver for Insulated Gate Bipolar Transistors
Stamer, F.; Liske, A.; Stadter, N.; Hiller, M.
2020. IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society, 1466–1472, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON43393.2020.9254390
Neue Methode zur Bestimmung und Beschreibung der taktfrequenten Stromsteigungen in Drehstromsynchronmaschinen. Dissertation
Liske, A.
2020, Juli 16. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000121303
Messung der taktfrequenten Stromsteigungen in Stromrichterschaltungen
Liske, A.
2020, März 12. Echtzeitanalyse und Leistungsmessung von elektrischen Maschinen und Stromrichtern : Cluster-Seminar und Workshop (2020), Aschaffenburg, Deutschland, 12. März 2020
Predictive Trajectory Control with Online MTPA Calculation and Minimization of the Inner Torque Ripple for Permanent-Magnet Synchronous Machines
Decker, S.; Brodatzki, M.; Bachowsky, B.; Schmitz-Rode, B.; Liske, A.; Braun, M.; Hiller, M.
2020. Energies, 13 (20), Article: 5327. doi:10.3390/en13205327
Sensitivity analysis of an adaptive open loop gate driver to manufacturing related varying igbt parameters
Stamer, F.; Liske, A.; Stadter, N.; Hiller, M.
2020. International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, PCIM Europe 2020; Virtual, Online; ; 7 July 2020 through 8 July 2020, 1528–1535, VDE Verlag
2019
Cascaded H-Bridge based Parallel Hybrid Converter - A novel Topology for perfectly sinusoidal high power Voltage Sources
Stefanski, L.; Bernet, D.; Schnarrenberger, M.; Rollbühler, C.; Liske, A.; Hiller, M.
2019, Oktober 16. 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019), Lissabon, Portugal, 14.–17. Oktober 2019
Resource optimal FPGA implementation of a Least-Squares-Estimator for fast and robust online measurement of current slope and absolute value
Liske, A.; Decker, S.; Braun, M.
2019. 21st European Conference on Power Electronics and Applications (EPE ’19 ECCE Europe), 1–10. doi:10.23919/EPE.2019.8915548
Online Parameter Identification of Permanent Magnet Synchronous Machines with Nonlinear Magnetics based on the Inverter Induced Current Slopes and the dq-System Equations
Decker, S.; Stoss, J.; Liske, A.; Brodatzki, M.; Kolb, J.; Braun, M.
2019. Proceedings 2019 European Conference on Power Electronics and Applications (EPE’19 ECCE Europe), Genova, Italy, 2019, P.1-P.10. doi:10.23919/EPE.2019.8915019
New gate driver for online adjustable switching behavior of Insulated Gate Bipolar Transistors (IGBTs)
Stamer, F.; Liske, A.; Hiller, M.
2019. 2019 21st European Conference on Power Electronics and Applications (EPE ’19 ECCE Europe), 3-5 September 2019, Genova, Italy, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EPE.2019.8915494
Cascaded H-Bridge based Parallel Hybrid Converter — A novel Topology for perfectly sinusoidal high power Voltage Sources
Stefanski, L.; Bernet, D.; Schnarrenberger, M.; Rollbühler, C.; Liske, A.; Hiller, M.
2019. 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019), Lissabon, Portugal, 14.–17. Oktober 2019
Cascaded H-Bridge based Parallel Hybrid Converter - A novel Topology for perfectly sinusoidal high power Voltage Sources
Stefanski, L.; Bernet, D.; Schnarrenberger, M.; Rollbühler, C.; Liske, A.; Hiller, M.
2019. IEEE 45th Annual Conference of the Industrial Electronics Society (IECON’ 2019), Lisbon, Portugal, October 14-17, 2019, 1639–1646, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON.2019.8927740
2018
Measurement of Two-Level Inverter Induced Current Slopes at High Switching Frequencies for Control and Identification Algorithms of Electrical Machines
Decker, S.; Liske, A.; Schweiker, D.; Kolb, J.; Braun, M.
2018. International Power Electronics Conference (IPEC), Niigata, Japan, May 20-24, 2018, 2848–2853, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/IPEC.2018.8507431
Direct adaptive current control in space vector overmodulation mode
Liske, A.; Braun, M.
2018. 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), Honolulu, Hawaii, USA, 12th -15th December 2017, 715–720, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/PEDS.2017.8289261
2015
Easy current slope detection for low cost implementation of the direct adaptive current control for DC-DC-converters
Liske, A.; Stamer, F.; Braun, M.
2015. 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 20-24 September 2015, Montreal, Canada, 180–186, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ECCE.2015.7309686
2014
Direct adaptive current control a universal current control scheme for electrical machines
Liske, A.; Braun, M.
2014. 40th Annual Conference of the IEEE Industrial Electronics Society (IECON), Dallas, Texas, USA, 29 October - 1 November 2014, 514–520, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON.2014.7048549
2013
Extended straightforward current control for permanent magnet synchronous machines
Liske, A.; Hofmeier, P.; Braun, M.
2013. 15th European Conference on Power Electronics and Applications (EPE), Lille, France, 2-6 Sept. 2013, 1–10, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EPE.2013.6634690
2011
Analysis and Modeling of the Quasi-Z-Source-Inverter
Liske, A.; Clos, G.; Braun, M.
2011. IECON 2011 - 37th Annual Conference on IEEE Industrial Electronics Society, 1197–1202, IEEE Computer Society
Vorlesungen / Übungen
Titel Typ Semester Ort
Echtzeitregelung elektrischer Antriebe Vorlesung (V) WS 24/25
Regelung leistungselektronischer Systeme (RLS) - VL/ÜB Vorlesung & Übung Sommersemester

Vorlesung & Übung: im SS2024 hybrid (Präsenz, Online-Stream und Aufzeichnungen). Die Präsenzveranstaltung findet im EAS-Hörsaal in Geb. 11.10 statt, die Zoom-Links werden im Ilias-Kurs veröffentlicht.
Schaltungstechnik in der Industrieelektronik Vorlesung Wintersemester

kl. ETI-Hörsaal
Stromrichtersteuerungstechnik Vorlesung Sommersemester

Kl. ETI Hörsaal (1.OG, Geb. 11.10)
Workshop Microcontroller in der Leistungselektronik - findet nicht mehr statt Praktikum Wintersemester 2015/16

Seminarraum (Raum 016), Rechnerraum (Raum -116)
Geb. 11.10 (ETI)
laufende studentische Arbeiten
Bild Titel Typ Betreuer Bearbeiter
abgeschlossene studentische Arbeiten
Titel Typ Forschungsthema Betreuer Bearbeiter
Vergleich verschiedener Verfahren zur Identifikation der Stromsteigungen in leistungselektronischen Schaltungen Masterarbeit Online-Parameter-Identifikation

Dr.-Ing. Andreas Liske; M.Sc. Simon Decker

Daniel Schweiker
Aufbau und Inbetriebnahme eines Moduls zur Messung der Spannungs-Zeit-Fläche von Stromrichterspannungen Bachelorarbeit Online-Parameter-Identifikation

Dr.-Ing. Andreas Liske

M.Sc. Matthias Brodatzki

Aufbau und Inbetriebnahme eines Prüfstandes zur Stromsteigungsidentifikation in Stromrichtern Masterarbeit Online-Parameter-Identifikation

Dr.-Ing. Andreas Liske

M.Sc. Matthias Brodatzki

Tim Hengrich
Untersuchung des Schaltverhaltens von Gan-HEMTs Bachelorarbeit

Dr.-Ing. Andreas Liske

Fabian Stamer
Entwicklung einer sanft-schaltenden DCDC-Wandler-Plattform zur Untersuchung neuer Halbleiter-Bauelemente Masterarbeit

Dr.-Ing. Andreas Liske
Aufbau und Inbetriebnahme einer 6-Puls-Brückenschaltung mit SiC-Halbleitern Masterarbeit

Dr.-Ing. Andreas Liske
Rückspeisefähige Stromversorgung mit PFC Studienarbeit

Dr.-Ing. Andreas Liske

Sebastian Toby
Realisierung der Direkten Adaptiven Stromregelung mit einem Mikrocontroller Bachelorarbeit Direkte Adaptive Stromregelung

Dr.-Ing. Andreas Liske

Ivo Georgiev
Realisierung der Direkten Adaptiven Stromregelung mit einem Mikrocontroller Bachelorarbeit Direkte Adaptive Stromregelung

Dr.-Ing. Andreas Liske
Implementierung eines echtzeitfähigen Verfahrens zur Identifikation von Stromsteigungen für eine prädiktive Regelung Diplomarbeit Direkte Adaptive Stromregelung

Dr.-Ing. Andreas Liske

Raimund Kempf
Aufbau eines Stromrichters mit Siliziumkarbid-Mosfets und Inbetriebnahme mit der direkten adaptiven Stromregelung Masterarbeit Direkte Adaptive Stromregelung

Dr.-Ing. Andreas Liske

Fabian Stamer
Inbetriebnahme eines neuen, adaptiven Stromregelverfahrens Masterarbeit Direkte Adaptive Stromregelung

Dr.-Ing. Andreas Liske

Moritz Albrecht
Entwurf und Aufbau eines netzunabhängigen Systems zur Regenwassernutzung Bachelorarbeit

Dipl.-Ing. Andreas Liske

Tobias Schwendemann
Betrieb eines Brushless-DC-Motors mit einem Mikrocontroller Bachelorarbeit

Dipl.-Ing. Andreas Liske

Alexander Weiß
Modul für den drehzahlgeregelten Betrieb eines Lüfters Bachelorarbeit

Dipl.-Ing. Andreas Liske

Stefan Weiß
Positionsregelung mit einem Brushless-DC-Motor Bachelorarbeit

Dipl.-Ing. Andreas Liske

Manuel Dold
Ansteuerung eines Schrittmotors mit einem Mikrocontroller Bachelorarbeit

Dipl.-Ing. Andreas Liske

Moritz Albrecht
Dreiphasiges Leistungsmessgerät mit einem Mikrocontroller Bachelorarbeit

Dipl.-Ing. Andreas Liske

Felix Conz
Untersuchung des Schaltverhaltens von GaN-HEMTs Studienarbeit

Dipl.-Ing. Andreas Liske

Christian Ort
Implementierung eines adaptiven Stromregelverfahrens in MatLab/Simulink Diplomarbeit Direkte adaptive Stromregelung

Dipl.-Ing. Andreas Liske

Dominic Müller
Adaptives Stromregelverfahren für permanentmagneterregte Synchronmaschinen mit Reluktanz Diplomarbeit Direkte adaptive Stromregelung

Dipl.-Ing. Andreas Liske

Philipp Hofmeier
Mikrocontroller gesteuerter, grundfrequent getakteter Netzstromrichter Studienarbeit

Dipl.-Ing. Frank Becker

Dipl.-Ing. Andreas Liske

Alexander Leuser